Used machines - Anderson America (en)

STRATOSUSD 27,900

Year:	-
Model:	STRATOS
Working hours:	4500

Technical Specifications

Table Size	2500 mm x 1300 mm (98” x 51”)
Vacuum Zones per Table	1 (one)
Axis stroke	X axis: 2500 mm (98”)
	Y axis: 1300 mm (51”)
	Z axis: 250 mm (10”)
Maximum Rapid Rate	X & Y-axis: 20 meters/min (787”/min)
	Z-axis: 6 meters/min (236”/min)
Maximum Feedrate	X, Y & Z-axis: 12 meters/min (472”/min)
Spindle Typ	10 Hp Anderson 2-Pole Grease Type
Speed	1000-18000 RPM
No. of changeable tools	8
Spindle nose	SK-30
**SK 30 tool holders	Miscellaneous holders & collets
Vacuum hold down system	25HP \| Capacity 325 cfm
	Pressure 28" Hg \| Zones: 1 (one)
Machine footprint	234” x 100” \| Height: 110"
Machine weight	4,500 lbs

Weeke Optimat BP-60USD 17,000

Year:	2000
Model:	Weeke Optimat BP-60
Working hours:	-

The Weeke machine is in “very good” condition, and has been operational since end of Oct 2000. And comes integrated with Wood Wop 4.5 software, disc and manuals included., the machine was inspected by a certified technician, and found in good working tolerance.

Technical Specifications:

Steel Frame
Vertical Boring 10 Individually Selected Spindles (6 X axis-4 Y axis) 32mm center 1.5kw motor
THK Guides
Horizontal Boring (4Spindles) Vertical Routing 3.3kw up to ½ “ dia. Collet 3,000-18,000 rpm.
Grooving Saw 1.5 kw 60hz motor (50mm-100 mm dia. saw)
5 panel support benches 2 vacuum pods each manual release
Can load two pieces at a time
40 cubic meters/hour capacity Perimeter fence included. Photocell barrier Weeke 2000-PC
Windows 98 based Pentium machine. 2 GB Hard Drive , 32 MB of RAM, VGA 14” monitor.
Bar code reader interface, simultaneous 3 axis linear control.
Ethernet connection, post processor Cabinetware, Cabinet Vision, integrated Holzma Cut Rite Software.
2-seats Wood Wop included.
Length of Machine 3800 mm
Width of machine 2700 mm
Height of machine 2000 mm
Height top of pods 920mm
Length 2100 mm
Width 800 mm
Max panel thickness 60mm (2 3/8” )
Machine Weight 2000kg
Positioning speed X axis 60m/min
Positioning speed Y axis 50m/min
Positioning speed z-axis 20m/min

OMNITECH BDTUSD 55,900

Year:	2011
Model:	OMNITECH BDT
Working hours:	-

Omnitech BDT 510 Demo Sale!
Demo Machine with new machine warranty

Stroke	Y Axis X Axis Z Axis	3100 mm (10.2 ft) 1900 mm (6.2 ft) 200 mm (0.7 ft)
Table Size		1550 x 3050 mm (5.085 x 10.006 ft)
Max. Feed Speed	Y Axis X Axis Z Axis	50 M/min (164 ft/min) 50 M/min (164 ft/min) 15 M/min (50 ft/min)
ATC Head With	NO. 1 Spindle Tool Holder Shank Number of Tools Speed	SK30 8 1.000~18.000 RPM
Boring Block	NO.2 Block (1x6) 1 HP	4.800 RPM
Tool Dia	For Router Bit (O.D.)	Max. Ø 25 mm (Ø 0.984 inch)
Shank	For Boring	Ø 10 mm (Ø 0.394 inch)
Power	ATC Head Boring Vacuum Pump	7.5 KW x 1 (10 HP) 1.75 KW x 1 (1 HP) 1 x 10 HP
Air Pressure		6 KG/cm2 (85 lb/in2)
Nc Controller		Syntec
Dimensions	Floor Area Height	4800x4250 mm (15.748x13.943 ft) 2450 mm (8.038 ft)
Air Consumption		450 L/min (15.9 cfm)
Suction Capacity For Main Spindle		2965 M3/HR (1745 cfm)

Stroke
Table Size
Max. Feed Speed
ATC Head With
Boring Block
Tool Dia
Shank
Power
Air Pressure
Nc Controller
Dimensions
Air Consumption
Suction Capacity For Main Spindle
Y Axis
X Axis
Z Axis
Y Axis
X Axis
Z Axis
NO. 1 Spindle
Tool Holder Shank
Number of Tools
Speed
NO.2 Block (1x6) 1 HP
For Router Bit (O.D.)
For Boring
ATC Head
Boring
Vacuum Pump
Floor Area
Height
3100 mm (10.2 ft)
1900 mm (6.2 ft)
200 mm (0.7 ft)
1550 x 3050 mm (5.085 x 10.006 ft)
50 M/min (164 ft/min)
50 M/min (164 ft/min)
15 M/min (50 ft/min)
SK30
8
1.000~18.000 RPM
4.800 RPM
Max. Ø 25 mm (Ø 0.984 inch)
Ø 10 mm (Ø 0.394 inch)
7.5 KW x 1 (10 HP)
1.75 KW x 1 (1 HP)
1 x 10 HP
6 KG/cm2 (85 lb/in2)
Syntec
4800x4250 mm (15.748x13.943 ft)
2450 mm (8.038 ft)
450 L/min (15.9 cfm)
2965 M3/HR (1745 cfm)

Latest NEWS

NC installation in progress

New development

Composite manufacturer with new MAXXIS twin table

Request Cart

STRATOSUSD 27,900

Weeke Optimat BP-60USD 17,000

OMNITECH BDTUSD 55,900